Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

$4.99 $5.00 On Sale
Will fit Specialized Sport/Comp/HP floor pumps from 2010 - present.
$0.95 $1.00 5% Off
Replacement UHP head O-ring seal
$12.00
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
$3.99
Replaces worn end on any pump hose. - Head Type: Schrader
$1.99
- Ball-inflating needle for footballs, basketballs and more
$9.00
If you have a SILCA PISTA made since 1946, a SUPERPISTA since 1989, or any of the Impero Frame Pumps since 2015, it has a check valve assembly like this to ensure that air can only go in one direction
$79.95
The new Prestaflator Digital is made possible by Prestacycle's new Rapid Response Digital Gauge. During inflation, the gauge is capable of showing immediate changes in pressure, enabling fast inflation – now with supreme accuracy. The gauge uses highly accurate, non-wearing circuitry for pressure readings, so it does not wear-out or loose accuracy like traditional Dial gauges. Highly accurate readings are across the whole range, making this tool excellent for Fat Tire, Cyclocross, MTB as well as Road Bikes. Easy Tool-less replacement of the two CR2032 batteries (included).
$9.00
The Iconic SILCA 24.1 gasket is the heart of the press-on Presta chuck. The current 242 gasket utilizes a high tech and very red, fully synthetic elastomer base material.
$19.99
Replacement rubber hose and ABS Flip Thread Chuck for all high-pressure floor pumps and Micro Floor Drive (HV/HVG & HP/HPG) hand pumps. Includes all necessary aluminum connectors.
$16.95
It’s back, the Pro’s favorite! Perfect for Tubeless tires, valve extenders and any Presta valve. It includes Prestacycle's newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for any Presta application. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. Deep head adapts to a wide variety of applications including valve extenders. The head is now very easy to get on and off. This head is a MUST for Tubeless tire users. Allows high-flow inflation with the valve core removed for seating tires. PUSH on / PUSH off – the fastest way to get you going. Made with nickel-plated 6061-T6 alloy – Strong as Brass and only 1/3 the weight. It’s also compatible with Silca pumps and can be adapted to other pump brands with our optional Schrader barb or our floor pump replacement hose. Patent-pending 2-way connector screws onto the Prestaflator threaded connector or directly clamps to a hose.
$73.00
- Replacement brake hose for MT series brakes - Hose length: 2500mm - Black
$10.00
Keep your Air Tool Pro floor pump working fantastic with this replacement head and hose.
$5.00
Rebuild kit for our most common Air Tool floor pumps. - Compatible with Air Tool Pro, Comp, and Sport floor pumps. - Includes O-ring lube and grommet.
$30.00
- Head/Hose for Air Tool UHP pump
$34.95
Upgrade any pump to the TwinHead pump head.
$10.95
A metal valve tool designed to tighten or remove Schrader and two-piece Presta valve cores. A special tool feature can also tighten or loosen Presta valve extensions. - Material: Aluminum - Schrader or two-piece Presta valve cores - Weight: 7 grams - Size: 4.5 x 1.1 cm / 1.8“ x 0.4”
$4.95
Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
$10.99
Compatible with Planet Bike ALX, AL, STX, ST, and COMP floor pumps - Dual head with hose - Will work with any floor pump Planet Bike has made except for Air Supreme
$147.95
Built and designed for bicycles, the INF-2 utilizes a redesigned, more durable, dual-sided, 360º rotatable Presta and Schrader head. The INF-2 also sports a new, lighter weight body and a redesigned trigger to facilitate multiple hanging options. It features a built in pressure gauge (0–160 psi, 0–11 bars) with a protective gauge boot, and the body accepts any 3/8" NPT male threaded fitting. Built for everyday shop use and 100% rebuildable!
$5.90
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
$11.95
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
$5.99
- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
$7.59
Lezyne Pump Parts
$5.00
Rebuild kit for the MTB floor pump. - Compatible with Air Tool MTB floor pump. - Includes O-ring, lube, and grommet.
$6.99
Bag of 3 replacement washers for EVA heads on all SKS floor pumps
$20.00
n partnership with the rubber and tire experts at Continental , we are offering a custom extruded 3/16" ID air hose compatible with all historic PISTA Handles.
$3.49
Bringing Lezyne's Smart Kit along means not letting a flat ruin your ride. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a compact pouch that fits just about anywhere for the ultimate in portability.
$5.95
Prestadapter is a lightweight Presta-to-Schrader adapter with one more great feature. The hole on the opposite side is a Presta valve core remover! Super-light Anodized Aluminum. - Schrader to Presta valve adapter - Presta valve core tool - Forged alloy single piece precision machined body - Only 1.3 grams actual weight each - Two (2) adapters included
$12.95
Prestacycle's new Mini Angle Presta Head has more room to fit into more wheels. It includes their newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
$29.95 - $39.95
Coil hose made is USA is superior to imported coil hoses. Rated for high pressure and durability. Brass swivel ends on both ends of the hose. Standard 1/4” NPT threads. Narrow hose increases strength and reduces waste when using Nitrogen. Short length hose recommended when your inflation source is close to your work or is portable and is usually moved to your work. Great for Nitrogen and small portable Air Compressors. Vibraseal coated threads, no thread tape or sealant needed!
$2.19
- Genuine Sunlite replacement hose - Type: Fits Sunlite Frame Pump : 5.25mm
$4.39
• Secures frame pump to frame • Nylon • Also good for use as a watch band
$26.99
Lezyne's ABS Pen Gauge is a replacement flex hose with an integrated, in-line psi/bar pressure gauge with easy to read markings. It is stored inside the handle of Flex Hose equipped Lezyne hand pumps (Medium and Large sizes only, sold separately), and is equipped with the ABS Flip Thread Chuck which threads onto Presta and Schrader valves for a secure connection.
$39.00
The Prestaflator ECO is designed with a medium flow trigger valve providing a perfect balance for inflation and seating tubeless tires. The dial pressure gauge lets you follow your progress visually. Designed for Bicycle Mountain & Road tires with a wide range of pressure requirements. Auto-Select Head Presta / Schrader auto-select head engages with a simple flip of the lever. Quick lever release minimizes air loss at disconnect. Quality Prestaflator is engineered specifically for the needs of bicycles and bicyclists. Only top quality materials are used for it’s components. We start with a cast Alloy body and give it a Nickel plated finish. The hose is made of reinforced PVC. It’s more flexible than rubber hoses and is rated for 300 PSI of continuous use. Smooth alloy clamps on the hose are more comfortable for use. The pressure gauge has a durable steel case covered with a rubber shock housing and offers accuracy with +/- 2%. The dial has a bicycle-specific pressure range of 12 Bar/174 PSI. It’s high enough to inflate any daily-use tire, but not excessive so the gauge is easy to read. Prestaflator – The Original Beware of fakes and cheap imitations sold by one-product sellers. These are not real brands that can stand behind your product. Prestacycle is the originator of the Prestaflator. We are a full-line Bicycle tools company providing the Cycling industry globally with world-class tool designs. Our R&D has created a proven design that we have consistently improved-upon through years of experience. Prestaflator is different… a high quality, serviceable tool… designed, built and warranted for use on Bicycles. Specifications: - 2" / Steel body dial pressure gauge. - 150 PSI (in 2 PSI increments). - 10.5 Bar (in 0.2 Bar increments). - Copper coil mechanism provides good accuracy. - Polymer Presta / Schrader auto-select head. - Engages any valve with a simple flip of the lever. - Presta AND Schrader - Quick lever release minimizes loss at disconnect. - Replaceable I/M compressor quick-release attachment. - Rubber pressure gauge housing for shock protection. - Cast alloy pistol grip handle with Nickel-plated finish. - Thumb-control pressure release button. - High-pressure hose for easy access on any wheel. Disclaimers Air compressor and air hose with quick release connector required for use – not included. Maximum air pressure is limited by your compressor’s capabilities.
$9.79
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
$9.00
The factory replacement for SILCA Press on Disc Chucks. The 252 replace the classic SILCA 25.1 gasket after more than 20 years in the market. This unique gasket borrows from industries which require air-tight seals in the harshest of environments. The 252 gasket utilizes a high tech, full synthetic elastomer base material. It tests to a life expectancy of more than 5X the carbon filled rubber or Buna-N materials used previously. In tests with a major disc wheel manufacturer, the current SILCA Disc Wheel Adapter with 252 gasket excelled by posting a blow-off pressure of 393psi where other designs were unable to reach 120psi. Older versions of the SILCA Disc Wheel Adapter will still benefit for the new gasket, but have a lower hands-free max pressure.
$6.59
Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap.
$56.99
This is a replacement hose for your Lezyne Micro Floor Digital Drive pump. It offers an integrated, highly advanced, inline digital gauge and ABS Flip-Thread chuck.
$5.99
- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm"
$21.99
Don't guess at your tire pressure, know with Sunlite's Duo Sport Gauge. This precision gauge reads your pressure accurately to 160 psi. The dual head works and plays well with both Presta and Schrader valves, too.
$4.95
Replacement parts for JoeBlow Pro and JoeBlow Booster.
$39.99
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
Page 1 of 2 Next page