Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Brakes/Levers/Pads

Avid Disc Bracket Mounting Bolts (Stainless)
$7.00
Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.
Avid 20R Brake Pads
$8.00
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
Avid Rim Wrangler 2 Brake Pad Inserts
$9.00
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.
Avid Rim Wrangler 2 Brake Pads (w/cartridge)
$18.00
Bolt on Avid's Rim Wrangler 2 Brake Pads for excellent stopping power. The cartridge design makes it easy to switch pads when they wear out. They're designed for use with linear-pull brakes.
Avid Shorty Brake Pad Inserts
$18.00
Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
Avid Speed Dial 7 Brake Levers
$18.00 - $31.00
Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible
Avid Disc Brake Pads (Juicy/BB7/BB5)
$19.99 - $27.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Front 180mm/Rear 160mm Post Bracket Hardware Kit
$22.99 - $58.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
Avid Road/Elixir/DB/Level B1 (2020+) Disc Brake Pads
$22.99 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Disc Brake Pads (Code)
$24.99 - $27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Shorty Brake Pads (w/cartridge)
$28.00
Bolt on Avid's Shorty Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
Avid G2 CleanSweep Rotor
$40.00 - $50.00
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.
Avid Hydraulic Line Kit
$45.00
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
Avid Shorty Ultimate Rim Brake
$108.99
For the stop/start world of cyclocross, Avid makes the inimitable Shorty Ultimate Rim Brake. The ideal balance of power, control and weight, the Ultimates are the choice of pro crossers across the globe. They offer an open design that clears mud quickly while also dishing out serious stopping power and modulation. Just a twist of the in-line cable adjustment knob lets you dial in cable tension, and you can choose between a wide or narrow stance for increased mud clearance or power. And, the Shorty uses standard road cartridge pads for easy maintenance.
Campagnolo Direct Mount Brake
$125.00
Self balancing design allows for completely symmetric set up and pad pressure. Forged alloy skeleton arms are extremely stiff and lightweight. - Includes special compound brake pads for optimal braking on both wet and dry surfaces - Compatible with all tires up to 32mm - Independent adjustment of individual arms - Compatible with all Ergopower shift levers - Brake Mount Type: Direct Mount Road Caliper - Brake Lever Actuation: Short Pull - Pad Type: Cartridge
Cane Creek Non-Aero Brake Lever Hoods
$10.82
• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown
Cane Creek SCR5 Brake Lever Hoods
$11.00
• Replacement hoods for Cane Creek SCR5 brake levers • Soft, tacky rubber for a sure grip • Available in black or gum
DT Swiss Centerlock To 6-Bolt Adapter
$24.99
- Adapts 35mm CenterLock rotor-mount splines to accept an International Standard 6-bolt, 44mm BCD rotor - Does not fit Saint-style 47mm Oversize CenterLock, and will not work with thicker, aluminum-carrier Hope 2005+ style Mono-series rotors - Designed for up to 210mm rotors - Tabs in adapter mate to (6) M5 rotor bolt holes and is secured by CenterLock-style lockring, sandwiching 6-bolt rotor to adapter - Lockring requires a 16-notch external bearing bottom bracket wrench - CL-IS adapter is black and lockring is black with silver etching: 29g
DT Swiss BXP Flash Pro Brake Pads for PR1400 OXiC Wheels
$26.50
High performance compound for alloy wheels improves power and modulation and has excellent stopping power when it's wet out. - Brake pad inserts are made by Swiss Stop - Flash Pro BXP pads fit Shimano and SRAM road caliper brakes
ENVE Brake Pads – Grey (Smooth Braking Surface)
$19.99
These replacement brake pads are designed specifically for full-carbon ENVE rims and wheelsets with a smooth surface brake track. Carbon fiber rim construction and design are only part of the solution to solving the heat equation. Brake pads play an integral role in ride performance and long-term durability of the wheel.
ENVE Brake Pads – Black (Textured Braking Surface)
$20.00
ENVE replacement brake pads for full-carbon ENVE rims and wheelsets with a smooth surface brake track. Our brake pads are specifically formulated and optimized for best performance with our molded-in texture brake tracks found on the Smart ENVE System (SES) wheels. - Only for use with the updated brake track found on ENVE SES 2.2, SES 7.8, and most recent versions of SES 3.4, and SES 4.5 wheels.
FSA K-Force WE Disc Brake Pads
$21.00
The FSA K-Force WE Disc Brake Pad is designed for maximum heat dissipation and minimum brake fade on long descents. - Sleek design when installed in K-Force WE caliper - Heat sink for maximum heat dissipation - Backing Plate Material: Aluminum - Compound: Semi-Metallic
FSA K-Force WE Disc Rotor
$82.00
- Two-piece rotor design with forged aluminum carrier - Double disc ground stainless steel rub ring - Countersunk rivets and disc screw mount points - Rounded edge shape - Mount Type: 6-Bolt
Hayes Banjo Bolt
$2.88
Replacement banjo bolt for Hayes hydraulic Brake systems.
Hayes Bleed Kit Adapter
$2.88
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
Hayes Rotor Kit
$8.40
- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm
Hayes G1/G2 Piston Kit
$8.72
Miscellaneous replacement small parts for Hayes hydraulic disc brake systems. - Includes piston and seal
Hayes Caliper Mounting Bolts
$9.00
Caliper Mounting Bolts for Hayes hydraulic disc brake systems.
Hayes Disc Pad Retention Pin/Clip
$9.00
- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip
Hayes Caliper Rebuild Parts
$10.60 - $31.50
- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap
Page 1 of 7 Next page