Pedals

At Hope we produce products for the true riders. This means developing the best components, not only for the extremes of downhill or EWS, but also for the punishing environment of XC racing and endurance riding. Here, balancing strength, weight and performance is key and we have now applied all our years of expertise into the clipless pedal. KEY FEATURES - Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability - Fully serviceable and re-buildable - Axle is high strength Cr-Mo, heat treated and plated - Titanium axle upgrades available - Q-Factor – 55mm - Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. - Large platform with option of 7 pins per side or foot plates to give maximum contact between the shoe and pedal and so provide the greatest stability. - Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release - Dual sided - Fully CNC Machined pedal bodies - Stainless steel clips and cleats - Large shoe/pedal contact area for maximum power transfer and stability - Replaceable pins for increased grip on Union GC (14 pins) - Foot plate option on Pedal for maximum shoe/pedal contact

Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

Dimension Nylon Basic Toe Straps -Durable metal buckle -Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel) - 450mm

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs

Customize and optimize the shoe/pedal interface. - Refine the interface between the shoe tread and pedal body - Four (4) contact sleeves - 1mm thickness

RaceFace Chester Pedal Pin Kit 20 Pins Black

IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer

Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness. - 28pcs rear load pins - 16pcs front load pins - Tool included

These 3mm stackers can easily correct the common issue of leg length inequality. - External cleat lift for addressing leg length inequality. - Shaped to fit SPD-SL, Look Keo, and Speedplay Zero pedals. - Includes longer screws. - Package includes two cleat stackers.

Dimension Mini Toe Clips - Toe clips do not accept toe straps - Sold as a pair - Mounting hardware for the toe-clip is included

Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips

Crank Brothers' 5050 Pin Kit includes 40 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

Crank boots designed for RaceFace Next R cranksets.

The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats. - Use: Road & Indoor Bike - Material: Polyacetal + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 75g

The Keo Spacer adaptors are slim wedges that fit between the shoe and the cleat. They aim to avoid the unpleasant creaking sound provoked by contact between the sole and the cleat, which can arise in particular with flat-soled shoes. Delivered with 2 spacers and 6 screws for quick and easy installation.

The KEO cleat covers are designed to protect your KEO cleats while walking. Compatible with KEO GRIP and KEO CLEAT, these covers lengthen the life of your cleats and improve safety when walking thanks to an anti-slip surface. - Compatibility: KEO Grip/KEO Cleat - Use: Protect the cleat

Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)

The Cleat Shim-Spacer helps compensate for leg length discrepancies.

- Strapless design is easy to engage without fully committing to the pedal - No special shoes required - Improves pedaling efficiency - Molded from unbreakable nylon - Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase - Includes mounting hardware. Note: metal plate may not be required during installation.

An affordable pedal option for city cruiser bikes. Features a rubberized cage.

Wellgo B-Series BMX/Mountain Platform Pedals. Molded pins

Aluminum body with plastic cage overmolded.

Shimano's SM-SH56 Multi-Release Cleats disengage with less effort and in more directions than standard SPD cleats. - Not compatible with Shimano PD-M858 (XTR) SPD pedals

Reliable and Durable 2-Bolt Cleat Small details make a big difference—especially when it comes to mountain biking. Worn-out cleats can lead to poor pedal function including premature or stubborn release. But swap on a new set of Shimano SM-SH51 Cleats and you know they're purpose-built to work seamlessly with nearly all Shimano SPD Pedals, delivering long-lasting performance thanks to their heat treated forged steel construction that will stand up to even the harshest riding conditions. Features: - Shimano SM-SH51 SPD Cleats come stock with all Shimano SPD pedals and are the go-to choice for mountain bikers, indoor cyclists, and anyone looking for a durable and reliable 2-bolt cleat. - Customizable: Engineered specifically to work with nearly all Shimano SPD pedals, which allow you to micro-adjust the spring force required to clip in and out of your pedals - Secure Engagement: Deliver 4 degrees of float, which assures just the right amount of movement while also providing a secure connection to your bike - Ease of Disengagement: Feature a 13-degree clip-out angle, allowing you to quickly get out of your pedals when the need arises - Built to Last: Made from heat treated forged steel that delivers durable long-lasting performance even under the most severe riding conditions PREDICTABLE ENGAGEMENT With 4 degrees of float, Shimano SM-SH51 Cleats permit just the right amount of movement for critical on-the-fly weight shifts while still delivering the secure cleat-pedal engagement needed to confidently tackle technical terrain. USER FRIENDLY Shimano SM-SH51 Cleats are compatible with nearly all Shimano SPD pedals, which allow you to micro-adjust how hard or easy it is to clip in and out, providing an unmatched level of customization. These cleats also feature a 13-degree clip-out angle, meaning with the simple outward twist of your heel you can quickly get out of your pedals when the need arises.

- Set of 44 total replacement steel pins for vault pedals - Run threads-out for maximum traction or flip the pins to heads-out for less grip - 16 Short pins (for use in the center) overall length 8.5mm, stud is 4.5mm - 28 Long pins (for use in the outside edge) overall length 12.5mm, stud is 4.5mm - Use either a 5mm spanner or the included 2mm hex wrench to secure/remove

Dimension Cruiser/Comfort Pedals. - Forged aluminum platform-type body with slip-resistant surface and built-in reflectors - Platform size is 105.5 x 74mm - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 448g

Dimension Mountain Sport Pedals. - Molded nylon pedal body - Accepts toe clips - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly - Weight: 290g

Wellgo LU-895 DU Caged Mountain Pedals feature a 1-Piece molded, cage-style body with DU Polymer bearing/bushings. Accepts toe clips/straps

- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc

Wellgo Clipless Cleats for SPD Style pedals.