Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Fenders
$37.99
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology.
- High performance dual compound plastic
- Easy quick-release-fastening by pre-adjusted powerstrap
- 2 joints for optimized adjustment to all frames
- Optimized dirt protection
- 27.5+ and 29-inch wheel compatible
$37.99
The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes.
- Virtually unbreakable high quality dual compound plastic
- Hidden chuck cone adapter which is fitted once during first assembly
- Easy quick-release fastening
- Optimized dirt protection
- Fits almost all suspension forks
- 27.5+ and 29-inch wheel compatible
$22.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
$79.99
The SKS SPEEDROCKER has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tyres exceeding 32mm. Proudly Made in Germany, the Speedrocker offers incredible stability over the roughest tracks while also providing optimum protection in all weathers.
- Rear fender expands for custom fit
- Rubber fasteners mount to a variety of frame styles
$24.99
Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.
$37.99
The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes.
- Virtually unbreakable high quality dual compound plastic
- Hidden chuck cone adapter which is fitted once during first assembly
- Easy quick-release fastening
- Optimized dirt protection
- Fits almost all suspension forks
- 26-inch and 27.5-inch wheel compatible
$67.99
Mudguard in pure form: EDGE AL guarantees city and trekking cyclists ideal splash protection on the road. This aluminum mudguard mounts close to the tire and offers great stability, although it is only attached at three points. No load rack is necessary to attach EDGE AL. With a purist matte-black look and an angular profile, EDGE AL integrates itself almost invisibly into the frame.
- Urban fender set
- Sturdy aluminum profile design for urban bikes
- Black U-stay
- Includes accessory parts and stays
- Weight: 568g
$72.99
- Color: Black
- Maximum Tire Width: 35 mm
- Fender Width: 45 mm
- Wheel Size: 700c
- Material: Aluminum
- Requires Eyelets?: Yes
$55.99
$80.00
30% Off
The DRY-TECH fender set is an engineered fender set with extended, research-based length for superior water protection. The fenders are made of a lightweight, yet highly durable multi-material design. It's also been engineered in Specialized's very own Win Tunnel in order to improve protection and to minimize water spray. The fenders are available in three different sizes (35, 45, and 52mm), and they're designed to work on bikes with 700C wheels—with or without Specialized Plug + Play frame mounting. Lastly, for a finishing touch, the fenders include heat-treated, lightweight aluminum fender stays with stainless steel hardware.
- Engineered fender set with extended, research-based length for superior water protection.
- Lightweight, yet highly durable multi-material design.
- Engineered in Specialized's Win Tunnel to improve protection and minimize water spra.y
- Designed to work on bikes with 700C wheels and with or without Specialized Plug + Play frame mounting.
- Heat-treated, lightweight aluminum fender stays with stainless steel hardware.
$17.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 31cm / 12.2" (in length)
- Weight: 47g / 1.66oz (FS, on fork)
$43.99
Mudrocker Front Fender for MTB is your perfect trail companion. Provides excellent mud and splash coverage on 27.5, 650b or 29er wheels with a maximum tire width of 3.0" Attaches to fork legs with hook and loop straps. Hook and loop strap fasteners or cable ties can be used to mount the Mudrocker to the fork bridge. If the fork bridge is perforated, the Mudrocker can be securely mounted with the included adapter. Fender can be adapted with scissors if necessary depending on the fork bridge. Perfect companion with the Mudrocker Rear Fender.
- Measurements: 490mm
- Weight: 112 grams
- Compatiblity Notes: Compatible with disc brakes. Not compatible with V-brakes.
- Made in Germany
$16.00 - $21.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess.
- Works on all RockShox fork models
- Comes with 4 zip ties for immediate installation
- Offered in a wide range of colors that match RockShox's fork decal packs
- Designed specifically for RockShox forks
- Deep side skirts protect stanchions and dust seals from rocks and debris
- Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
$18.00
Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit.
- Front fender is 254mm wide and 622mm long (10" x 24.5")
- Extra-long, wide design blocks snow, water and sand
- Bracket keeps fender super stable and is easy to install
- Built with lightweight, sturdy materials for durability
$15.99
- Raceblade Long Hardware Kit, for 2nd bike, or to replace worn parts
$32.99
Meet the Mucky Nutz MugGuard... our super, snazzy, award-winning mudguard for mountain bikes, made in the UK from 100% recycled plastic.
$13.00 - $14.99
Easy to install and available in various colors and designs, the Splash Pad Front Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and compatible with suspension forks.
- A low-profile, easy-install fender that keeps riders clean in various conditions
- Fits wide range of wheel sizes
- Tool-free installation
- Zip ties not included. Color zip tie options available through Problem Solvers.
$16.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use.
- Length: 370mm (14.5")
- Weight: 60g (2.1oz)
$37.99
The X-Blade 26/27.5-inch is a high-quality 2-component fender for the rear wheel of mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology.
- High performance dual compound plastic
- Easy quick-release-fastening by pre-adjusted powerstrap
- 2 joints for optimized adjustment to all frames
- Optimized dirt protection
- 26-inch and 27.5-inch wheel compatible
$68.99
The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support.
- Compatible only with disc brakes
- Includes hook-and-loop fasteners and tension rubber
- Weight: 580g
- Max. outer diameter: 35mm
- Wheel size: 27.5" (650B), 28"
- Tire width: 52mm
- Length, front fender: 680mm
- Length, rear fender: 870mm
$12.99
The Mudrocker Rear Extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. This item is included with the Mudrocker Rear Fender, but we offer it here as a replacement.
- Made in Germany
$68.99
The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support.
- Compatible only with disc brakes
- Includes hook-and-loop fasteners and tension rubber
$89.00
These fenders feature a classic hammered pattern and are available in high polished silver and smooth Noir. They're 45mm wide, designed for 700c and 27" wheels, and work with tires up to 35mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders.
- Fenders are made from aluminum alloy for strength while staying lightweight
- Rear fender is 120cm long and the front is 90cm long
- Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount
- Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions
- Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions.
Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build.
$59.99
IMPACT-RESISTANT CLEANERS FOR THE BIKE
Fender set made of robust sandwich construction
A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion.
Stylish driving fun with a safety system
With its glossy black surface and black fastening components, the BLUEMELS BASIC also leaves nothing to be desired in terms of looks. The ASR safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock up. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts.
- Aluminum/plastic sandwich construction
- V-struts with fixed bridges for flexible adjustment
- ASR safety system
- Bottom bracket cutouts
- Made in Germany
$67.99 - $71.99
IMPACT-RESISTANT CLEANERS FOR THE BIKE
Fender set made of robust sandwich construction
A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion.
Stylish driving fun with a safety system
With its glossy black surface and black fastening components, the BLUEMELS BASIC also leaves nothing to be desired in terms of looks. The ASR safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock up. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts.
- Aluminum/plastic sandwich construction
- V-struts with fixed bridges for flexible adjustment
- ASR safety system
- Bottom bracket cutouts
- Made in Germany
$26.99
- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc.
- Fits a maximum tyre width up to 38mm.
- It is the ideal companion to our S-BLADE rear mudguard.
- Its smart, double hinged quick release fitting system also fits aero forks.
- Paintwork protection film for the frame is included.
$13.00
Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations.
- A low-profile, easy-install fender that keeps riders clean in various conditions
- Fits wide range of wheel sizes
- Tool-free installation
- Zip ties not included. Color zip tie options available through Problem Solvers.
$149.00
Made of sturdy anodized aluminum and adorned with laser graphics, the full Metal fenders are a beautiful complement to any bike with 27.5"/650b or 29" sized wheels and room for extra clearance. The 27.5x2.5" Full Metal Fenders can fit up to 650x56mm or 27.5x2.2" tires maximum. They come with special extra long hangers designed to better fit 650b/27.5" frames and forks. The 29x2.5" (700x65mm) Full Metal Fenders will fit bikes with 29x2.2" tires maximum. They come with special double rear alloy stays that add stability and prevent rattling over larger tire sizes. The double rear stays add stability and prevent rattling. They provide full-wrap coverage, even shielding your shoes and riders on your rear wheel thanks to extra long and super flexible polypropylene mudflaps.
Safety release tabs ensure your wheels keep turning even if debris gets lodged between the fender and tire. The Full Metal Fenders easily mount to bikes with eyelets using all stainless steel hardware which may be replaced as needed.
Specifications:
-65 mm wide to fit 650bx56mm (27.5x2.2) tires maximum
-2.5"/65mm mm wide to fit 29 x 2.2" tires maximum
-Weight: 730 grams
-Lifetime PDWarranty
$14.59
Meet the brand new, fantastic, feature packed Face Fender!
Lightweight, discreet, and very effective, the Face Fender is a simple front mud guard for mountain bikes, made from 100% recycled plastic.
SHIZZLE SHIELD
- Integrated into the Face Fender is the Shizzle Shield, which, when folded toward the tyre, stops pretty much anything from being flung forward and hitting you in the mush.
NO MORE ZIP-TIES
- No more zip-ties! The fender is profiled to hold the Velcro fastener without needing zip-ties or anything else.
$21.00
Gravel away in rain, show, sleet or shine. The new RockShox premium short fender is designed to keep you dry and clean when the weather turns. It can be easily installed at 3-bolt mounts and looks as if your fork and fender are one, leaving your friends wondering why they are still messing around with zip ties.
- 3-bolt mounts ensures secure attachment
- Designed to integrate seamlessly and look pro with RockShox branding
- Compatible with all Rudy XPLR models
$57.95
Topeak's DeFender XC1 front fender offers durable rain and mud protection for your 26-inch wheeled bike. It's incredibly light and easy-to-use, too. Extra clearance makes it perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.
Page 1 of 3
Next page