Filter By:
Hubs

$53.99
Shimano XT M756 front hub.
- Double contact sealing
- Super polished bearing races for low friction rolling
- Light alloy QR lever and nut
- 6-bolt ISO disc mounting surface

$99.00 - $117.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.

$465.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

$225.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Fully convertible with tool-free end caps
- BOOST variants
- 24, 28 or 32 spoke holes

$76.90
Direct power meets simplicity—running smoothly day-in and day-out.
The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

$225.00
Whether the goal is a finish line, epic adventure or simply getting back home again, our new 900 hubs are ready for the challenge. On the inside, our smooth and durable DOUBLE TIME drive mechanism ensures rapid lightning-fast engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Includes Quick Release & 12x142mm Through AxleCaps
- Fully convertible with tool free end caps
- DOUBLE TIME mechanism offers smooth,quick and durable engagement
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Axle type: Conversion Caps included
- Spoke holes: 24
- Brake compatibility: Disc (6-bolt)
- Driver Mechanism: Double Time - Four Pawl
- Axle material: Tapered aluminum
- Driver body material: Aluminum
- Hub shell: Aluminum - Seeker angled flanges - Oversized body

$76.90 - $90.90
Reliability meets simplicity—running smoothly day-in and day-out.
The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

$269.99
- Elite Series convertible road disc hubs
- Available in multiple axle configurations
- Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement
- Straight pull and J-bend spoke options
- 6 bolt and Center Lock disc brake rotor options
- Sealed bearings
- Material: AL6061
Straight Pull Spoke/QR Axle:
PCD-L: 35mm
PCD-R: 49mm
LTF-L: 32.75mm
LTF-R: 50.05mm
CTF-L: 34.9mm
CTF-R: 17.6mm
Straight Pull Spoke/12mm Thru-Axle:
PCD-L: 35mm
PCD-R: 49mm
LTF-L: 36.25mm
LTF-R: 53.55mm
CTF-L: 34.9mm
CTF-R: 17.6mm
J-Bend Spoke/QR Axle:
PCD-L: 45mm
PCD-R: 50.6mm
LTF-L: 32.65mm
LTF-R: 48.2mm
CTF-L: 35mm
CTF-R: 19.45mm
J-Bend Spoke/12mm Thru-Axle:
PCD-L: 45mm
PCD-R: 50.6mm
LTF-L: 36.15mm
LTF-R: 51.7mm
CTF-L: 35mm
CTF-R: 19.45mm

$139.99
- Aluminum alloy shells resist corrosion and provide lightweight longevity
- Sealed cartridge bearings offer smooth operation while resisting contaminants
- Thru axle design with 8-10 speed cassette and XD drivetrain options
- Brake Type: 6B

$90.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Fully convertible with tool-free end caps
- 24, 28 or 32 spoke holes

$100.90
Direct power meets simplicity—running smoothly day-in and day-out.
Classic Track hubs are the right choice if it's about all-out sprinting and precise lap times. With their threaded axles and the proven DT Swiss bearing technology, they feel right at home racing on the track or navigating dense city traffic on a fixie.
- Net weight: 271g
- Application: Track
- Material: Aluminum
- Brake interface: Non-disc
- Axle system: 9mm Nutted
- Over locknut dimension (O.L.D.): 100mm
- Number of holes: 20

$383.90
Aluminium front hub for bicycle - 18P DBCL 24 holes, straight pull, black. Dimension: 12x100mm.

$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.

$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.

$223.90
Direct power meets simplicity—running smoothly day-in and day-out.
The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

$85.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical.
We've ridden them on all kinds of bikes from mtb to road and we're in love. They are reliable, dang light and very reasonably priced.
We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release, 12mm, and 15mm endcaps are included.
On all models we spec high-quality made in Japan stainless-steel sealed bearings.
Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity in our modern world.
- Weight: Disc Brake: 164g
- Includes 12mm, 15mm endcaps and quick release skewer
- Non-Drive Side Center To Flange Disc Brake: 21mm
- Drive Side Center To Flange Disc Brake: 36mm
- Non-Drive Flange Diameter Disc Brake: 58mm
- Drive Side Flange Diameter Disc Brake: 45mm

$85.00
New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do.
They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability.
Front hub specs:
- Weight: 198g
- Torque Spec: 33nm (25ft lbs.)
- Non-Drive Side Center to Flange: 34mm
- Drive Side Center to Flange: 34mm
- Non-Drive Side Flange Diameter: 62mm
- Drive Side Flange Diameter: 62mm
Rear hub specs:
- Weight: 234g
- Torque Spec: 33nm (25ft.lbs.)
- Non-Drive Side Center to Flange: 29mm
- Drive Side Center to Flange: 29mm
- Non-Drive Side Flange Diameter: 62mm
- Drive Side Flange Diameter: 62mm

$85.00
Surly's Ultra New Disc Front Hub is a gorgeous hunk of aluminum that boasts reliable sealed bearings and a 6-bolt disc attachment. The forged chromoly axle is flex-free for steering precision, long-lasting durability and simple quick-release compatibility.

$38.99
Quick Release Model
• Model Number: HB-M8000
• Series: DEORE XT
• Disc Rotor Mount: Center Lock Disc
• Axle Type: QR
• Axle Length: 100mm
• Axle Diameter: 14mm
• Contact Sealing: Labyrinth & Contact
• Spoke Holes: 32H
• Center to Flange (Right): 41mm
• Center to Flange (Left): 44mm
15x100mm Thru-Axle Model
• Model Number: HB-M8010
• Series: DEORE XT
• Disc Rotor Mount: Center Lock Disc
• Axle Type: 15mm E-Thru
• Axle Length: 100mm
• Axle Diameter: 17.5mm
• Contact Sealing: Labyrinth & Contact
• Spoke Holes: 32H
• Center to Flange (Right): 44mm
• Center to Flange (Left): 44mm

$465.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hub, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

$113.90
Reliable, simple, and e-bike specific hub.
To withstand the higher torque of e-drive systems, the 350 hybrid is equipped with steel rotors and a specific 24T ratchet machined out of hardened steel. Oversized bearings ensure smooth running under extreme conditions.

$223.90
The 350 road hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these hubs will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement no matter how hard you stomp on the pedals.

$244.99
Shimano Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 8 speeds, all with the reliability and low maintenance you can only get with an internally geared hub.
- Center Lock Disc Rotor Compatible
- Rotor lockring not included
- Hub Center to Flange: 30.0mm
- Hub Drilling: 32-hole
- Flange Diameter: 92.5mm
- Drivetrain Speeds: 8
- Spoke Interface: J-Bend

$57.99
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with Center Lock spline mount and lock ring
- Tool-less 15mm thru axle system optimizes rigidity and weight
- Simple setup and reliable trail performance

$32.99
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling.
- Internal O-rings and grease sleeve
- High quality, sealed Cup & Cone Bearing
- High durability and smooth rolling for sustained performance

$191.99 - $196.99
Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading.
- Weight: 313 grams

$56.99
Shimano XT FH-M8010/M8000 Rear Hubs.
- Double contact bearing seals
- Super polished bearing races for low friction rolling
- Shimano Quick-engagement freehub
- Not compatible with Shimano 11-Speed Road cassettes
- Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability
- Center Lock disc brakes provide reliable braking power (lockring sold separately)

$140.99 - $144.99
- Aluminum Hub Shell
- Over Locknut: 100mm
- Stainless Steel Ball Bearings
- Spoke Hole Circle: 38mm
- Center to Flange (Right): 37mm
- Center to Flange (Left): 37mm
- Average Weight: 203g
Page 1 of 3
Next page